The patented 100″ Fresnel ALR screen rejects ambient lighting from being reflected back to the viewer, presenting a bright display even in broad daylight. To be sure, this was using the screen that ViewSonic is currently packaging with the X2000B-4K, which presents the projector in the best light, no pun intended. The built-in Harman Kardon stereo speakers did not have any discernible audio distortion even at maximum volume – and that volume was pretty impressive for a pair of 25W (10W tweeter + 15W woofer) speakers. Despite that, the image that it projected remained bright with decent contrast and vibrant colours, thanks to the 2000 ANSI lumens of brightness that the projector boasts, and the company’s proprietary Cinema SuperColor™ Technology. ViewSonic is so confident in this product that the review environment it set up was about as hostile to projectors as it could be an open indoor space in a shopping mall with lots of bright lighting and ambient noise. Or, if you prefer, install the ViewSonic vCastSender app on your Android device of choice and control it that way.Īs mentioned, the X2000B-4K is meant to be the mainstay of a home entertainment system, and it does so really well. Beyond that, the firmware can be updated (yes, the X2000B-4K comes with networking more on that later), and you can even install streaming apps right into the 32GB onboard storage (26GB usable) from ViewSonic’s app store. By using the included remote control to navigate the menus, the usual brightness, contrast, and other audio/visual settings can be adjusted. Hence, the OSD looks more like the full-screen GUI that a smart TV would present to you. The X2000B-4K is a ‘smart laser TV’, which means that rather than simply being a display, it comes with ViewSonic’s own Android-based OS. The X2000B-4K comes with a safety feature that cuts power to the lamp if it detects someone is coming too close to it. Coming in two variants (black or white), the X2000B-4K provides that 100 inches of display real estate when positioned approximately 60cm away from the surface you’re projecting it on to (measured from the back of the projector it’s 23.4cm away if measured from the front). Weighing in at nearly 7kg nett (6.8kg according to ViewSonic), this is pretty light, especially when compared to a 100″ LCD TV, which is what this projector is meant to compete with.Īs the name suggests, the X2000B-4K is a projector that uses laser phosphor technology to project at a ‘native’ resolution of 4K (3840×2160) at 60Hz. ![]() In the meantime, however, the X2000B-4K seems to be a solid product. And maybe time will bring any such issues to light. Which is interesting, since this is ViewSonic’s first-ever such projector, and you would expect there to be teething issues with any first-generation product. Many other displays out there try to be all things to all people the X2000B-4K is built from the ground up to be the best complement to your home theatre setup… even if it has to do it all on its own. Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.ViewSonic is a world-renowned display specialist, and its X2000B-4K ultra-short-throw projector (or UST projector/‘laser TV’ as it’s sometimes referred to) is a good example of how the company puts together a solid product that is designed to do one thing and do it well.If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.Replace only with the same or equivalent type recommended by the battery manufacturer.Avoid leaving the remote control and batteries in excessive heat or a humid environment.Replace the battery cover by aligning it with the base and pushing it back into position.NOTE: Observe the battery’s polarities as indicated. Remove any existing batteries (if necessary) and install two AAA batteries.Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across.NOTE: Refer to the illustration for the location of the infrared (IR) remote control sensor(s). The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft.).The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).To ensure proper function of the remote control follow the steps below:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |